Installing & managing complex safety systems- for buildings that can't afford failure.

Fire alarms, sprinkler controls and electrical infrastructure, designed, installed and maintained by a team that turns up, documents the work, and stays for the long haul.

hero
Est.2021Bromsgrove, UK
wsd intro
A bit about us

A small firm with large-site experience.

WSD was established in 2021 by three engineers with over forty years of combined experience between them. We exist to design, install, commission and maintain complex fire and electrical systems, and to leave the documentation in better shape than we found it.

We’re knowledgeable, professional, and present every step of the way. That’s not a slogan; it’s why our clients keep us on long after the install signs off.

Our services

Fourteen disciplines.
One accountable team.

Each service has its own dedicated page with scope, what’s included, recent projects and an enquiry form. Tap any tile to dig in.

Fire Safety Servicing & Maintenance

Scheduled servicing of existing fire alarm and electrical systems, with reactive cover.

Open service

Emergency Lighting Installation, Testing & Maintenance

Self-test and central-battery emergency lighting installation, testing and certification.

Open service

Linear Heat Detection Systems

Linear heat detection cable for tunnels, cable trays, conveyors and refrigerated stores.

Open service

Fault Finding & Diagnostics for Fire & Life Safety Systems

Diagnostic call-outs on inherited or misbehaving systems. We find it and fix it.

Open service

VESDA Aspirating Smoke Detection Systems

Aspirating smoke detection for high-value, high-airflow and concealed-space environments.

Open service

Fire Alarm System Installation, Design & Commissioning

Addressable and conventional fire alarm design, installation and certification.

Open service

Sprinkler Zone Check Systems

Flow-switch and zone valve test systems for compliant sprinkler zone monitoring.

Open service

Gas Suppression & Fire Suppression Systems

Detection, interface and release controls for clean-agent and inert-gas suppression.

Open service

Pre-Action & Deluge Systems

Specialist controls for double-interlock, single-interlock and deluge sprinkler systems.

Open service

Frost Protection Health Checks

Pre-winter audits of trace heating, insulation and frost-stat circuits before it matters.

Open service

Electric Trace Heating Systems

Self-regulating trace heating and insulation for sprinkler tanks, pipework and pump rooms.

Open service

Full Life Safety Monitoring

Networked detection, interface units and graphics-panel monitoring across estates.

Open service

Pump Wiring & Control Circuits for Sprinkler & Wet Riser Systems

Sprinkler pump houses, jockey controls, bespoke switchgear, wired and signed off.

Open service

Commercial Water Leak Detection Systems

Water leak detection systems for plant rooms, server halls and tenanted floors.

Open service
How We Work

Four steps, no suprises.

From the first phone call to the maintenance schedule, here’s what working with WSD looks like in practice.

Site walk

We come out, look at the job, and listen. No quotes from a desk in another county.

Spec & quote

A clear, line-itemed quote with the design rationale attached, so you know what’s being installed and why.

Install & commission

Our engineers, not subcontractors, do the work, document it, and walk you through the system before sign-off.

Maintain

Scheduled servicing, certificates kept current, and a number to call when something doesn’t sound right at 2am.

A bit about us

Why choose WSD Fire & Electrical?

WSD was established in 2021 by three engineers with over forty years of combined experience between them. We exist to design, install, commission and maintain complex fire and electrical systems, and to leave the documentation in better shape than we found it.

We’re knowledgeable, professional, and present every step of the way. That’s not a slogan; it’s why our clients keep us on long after the install signs off.

van wsd
Selected work

A few jobs we're proud of.

From municipal recycling facilities to multi-warehouse logistics sites, here’s a sample of recent installations and ongoing maintenance contracts.

canning town

Canning Town

Self-test emergency lighting retrofit across six floors, including monthly compliance reporting.

View project
aldermanbury square

Aldermanbury Square

Aspirating smoke detection across two server halls, with central monitoring and quarterly servicing.

View project
ley and wheeler

Ley & Wheeler Warehouse & Distribution

Self-regulating trace heating installation for sprinkler tanks and pipework in a −25 °C cold storage facility.

View project
central house

Central House

Networked addressable fire alarm system across 400+ devices, with graphics-panel monitoring and an ongoing maintenance contract.

View project
sherborne mrf

Sherborne MRF Sprinkler Upgrade

Replacement of zone-check systems and upgraded pump controls across a 12,000 m² material recovery facility, completed in two phased weekend shutdowns.

View project

All Projects

Browse every installation we’ve completed, fire systems, sprinklers, electrical infrastructure and ongoing maintenance contracts across the Midlands.

See all projects
Our team

The people who'll
actually turn up.

WSD is run by three engineering directors backed by a crew of qualified electricians and apprentices. The same people quote, install and maintain, there’s no hand-off.

luke wsd headshot

Luke Wellings

Director · Operations

Apprenticeship in 2005; runs day-to-day operations and the design table. The reason quotes are clear and projects run on time.

ben wsd headshot

Ben South

Director · Sprinkler lead

Sprinkler-side since 2008 and the engineer most likely to be on the end of the phone after hours. Gives every job the answer he’d want himself.

stu wsd headshot 1

Stuart Dodson

Director · Founder

In the industry since 2007 and qualified across all disciplines of WSD’s work. The detail person, drawings, signoffs, and the appetite for the big stuff.

Accredited & insured

Properly certified.
Properly insured.

Current accreditations across fire, electrical and contractor compliance, plus £10m public liability cover. Renewed on time, audited annually.

FAQs

Got questions? We've answered the common ones.

Quick answers on cover, callout times, accreditations and what working with us actually looks like. Still got a question? Get in touch.

Do you offer 24/7 emergency call-out?

No. Reactive call-out is available during office hours (9am to 5pm, Monday to Friday). If you need round-the-clock cover for fire and life safety faults, we’ll be honest about it and help you find a provider who specialises in that.

Do you cover domestic / home smoke alarms?

No. WSD is a commercial fire and electrical contractor. If your home smoke alarm is beeping (typically a dying battery), the answer is usually replacing the battery or the whole alarm, and a local electrician or the alarm manufacturer’s customer service is the right route.

What’s the difference between maintenance and reactive work?

Maintenance is the scheduled, planned servicing in your contract — quarterly visits, annual full tests, certification and the rest.

Reactive work is anything that arises between visits: a fault, an alarm, a callout. Reactive work for contract clients is prioritised and typically billed at a contract rate. Reactive work for non-contract clients is available case-by-case at standard rates.

Do you cover the whole UK?

Yes, we deliver maintenance contracts and projects nationally from our Bromsgrove HQ. Most of mainland Britain is within a routine response window for reactive maintenance work.

Sites further from the Midlands may have slightly longer response windows for reactive call-outs; we can provide a map of typical response times by area during the initial survey if it’s relevant to your site.

Are you fully insured and accredited?

Yes. We hold BAFE, NICEIC, FIA, BSI and SafeContractor accreditations.

Insurance: £5m public liability, £10m employers liability, £1m professional indemnity, £5m product liability. Certificates available on request.

Do you offer ongoing maintenance contracts?

Yes. Most of our clients move onto a planned maintenance contract either after installation or as a takeover of an existing system. Service intervals, certification, response windows and reactive scope are agreed up front and documented in the contract.

Can you take over an existing system installed by someone else?

Yes. We routinely take over the maintenance of systems originally installed by someone else.

We carry out an initial survey and full functional test of the existing system first, give you a written baseline of what’s there and what condition it’s in, then quote against bringing it onto an ongoing maintenance contract. The survey is quoted separately to the contract, so there’s no commitment until you’ve seen the findings.

How quickly can you respond to a callout?

For clients on a maintenance contract, reactive call-outs are prioritised and attended within agreed response windows during office hours (9am to 5pm, Monday to Friday). For ad-hoc call-outs without a contract, we attend as soon as our schedule allows, typically same-week for non-critical work.

WSD doesn’t operate a 24/7 emergency response. For sites that need round-the-clock cover we’re upfront about that and can point you to providers who specialise in it.

Contact us
Get in touch

Tell us about
the building &
we'll come look.

Most jobs start with a site visit. Send a few details below or pick up the phone, we’ll arrange a walk-around within the week and follow up with a clear, line-itemed quote.

Office
Bromsgrove,
Worcestershire
Hours
Mon-Fri 8-6
24/7 callout

Send a quick brief.

Tell us what you need. We’ll come back with a clear next step within the working day.

Contact Form